Confirm you have received the prototypes by filling out a short 5-min google form.
Use the prototypes you received. Read the product information before use here.
Third heading
After a few weeks, complete a follow-up feedback form that will be emailed to you.
Product Information
IMPORTANT
All prototypes are made with untested materials and were constructed uniquely to assess different methods of assembly. Display cases are similar to picture frames in terms of durability—if dropped, they will break. Keep out of reach of children. Prototypes have a higher chance breaking and should not be handled by anyone other than the designated recipient.
Replacements
Replacements for prototypes will be granted on a case-by-case basis. You can request a replacement for a prototype in the follow-up feedback form that will be sent to you via email.
Materials
Displays are made of multiple layers of laser cut cast acrylic (plexiglass). No parts are 3D printed.
How to use
Before you use the display, make sure that it is able to lean against a stable surface. A card will stay in the display as long as the case is tilted at a slight angle. To put a card in the display case, insert at an angle below the top panel that slightly overlaps the card area. To remove a card from the display case, simply turn the display case upsidedown and gently remove card.
SPECS
TOPLOADERCARD DISPLAY
- Holds most 3x4" standard toploader rigid PVC card cases
- Dimensions: 3.8x5.9" (8.5mm thick)
- Depth of card area: 3mm
GRADEDCARD DISPLAY
- Holds most graded slabs 3.2x5.35"
- Compatible graded slabs: CGC, PSA, AGS/Robograding, Degree Grading (for Pokémon cards only)
- Dimensions: 3.8x7.15" (13mm thick)
- Depth of card area: 7.5mm
Care & Cleaning
To prevent possible warping, do not leave cases in direct sunlight and/or store in extreme heat. Not for outdoor use. Displays do not protect cards from damage or wear. Remove dust and smudges by gently polishing surface with microfiber cloth.
GRADED SLAB DISPLAY
- Holds most graded slabs 3.2x5.35"
- Compatible graded slabs: CGC, PSA, AGS/Robograding, Degree Grading (for Pokémon cards only)
- Dimensions: 3.8x7.15" (13mm thick)
- Depth of card area: 7.5mm
TOPLOADER DISPLAY
- Holds most 3x4" standard toploader rigid PVC card cases
- Dimensions: 3.8x5.9" (8.5mm thick)
- Depth of card area: 3mm
CUSTOM PROTOTYPE
CARD DISPLAY
You have been selected to receive the first round of my custom card display prototypes and participate in an invite-only R&D.
Learn More
Card Display
Prototypes
I created a series of Pokemon card displays that I would like a specific group of collectors to receive and review to help me better the process and the product. You are one of the 5-10 accounts that I have selected to receive the first round of prototype displays.
